Monday, February 1, 2010

Team Geronimo Announces 2010 All-Star Sponsor Lineup

After a whirlwind debut at Interbike ’09, Team Geronimo (http://www.geronimoracing.net) has ramped up to full on tornado status. The Pro racers, staff and Junior Development Team of Team Geronimo are proud to introduce their 2010 lineup:


- The Bikes -

As the USA Factory Racing Team for Banshee Bikes, Team Geronimo is proud to be aboard the newly released Legend MkII downhill frame, which is nothing short of phenomenal. Just days after its public release, Pro racer Graeme Pitts took the maiden voyage as the first in the world to ride this beauty. With less than 5 hours on the bike, Pitts managed a Top 15 finish at Round 2 of the Australian National Series at Shepparton. How does it ride? Let’s just quote Banshee Bikes owner Jay MacNeil, who said, “Anyone who rides this bike is almost cheating!” It really is THAT FAST. Team Geronimo will also be racing the Banshee Rampant in 4X and DS events.

http://www.bansheebikes.com



- The Kit -

Custom made Wrex Racing apparel will outfit the team. Their purpose-built gear is truly remarkable, stylish, and will exceed even the toughest critic’s expectations. Wrex offers a full line of custom jerseys, pants, shorts, rash guards (silver-embedded for odor control and anti-microbial action), winter jackets, rain jackets, hoodies, formal wear (for banquets and sponsor meetings!) and more. They make it easy to be the best-dressed racer on the race course. Wrex Racing’s motto says it all, “Rule #1: Leave the competition behind. Rule #2: There is no rule #2!”

Underneath their custom kits, the team will be protected by Dainese gear. It’s a shame that such excellent, stylish protection has to be covered up. From the minute the body armor comes out of its shipping box, it is evident that this gear is state of the art, lightweight, supple and STRONG. Finally, it is truly comfortable protection - riders might even forget they’re wearing it! From Seth Graves of Dainese/BTI-USA, “We are excited to start the 2010 race season sponsoring such a great team of excellent racers!”

The team will protect their brains with helmets by Kali Protectives – a company making quick strides in the MTB protective world. Racers will keep their eyes on the prize with eyewear by Smith Optics. No team would be complete without casual shorts from Cowboy’s Fuzzy Duds – look for their signature wacko prints to compliment team livery when they’re off the course.

http://www.wrexracing.com
http://www.dainese.com
http://www.kaliprotectives.com
http://www.smithoptics.com
http://www.cowboysfuzzyduds.com


- The Components -

Hayes Bicycle Group is equipping the team with powerful Hayes Brakes systems, race worthy Sun RinglĂ© wheelsets, and Answer ProTaper bars and gloves. Racers will enjoy a buttery-smooth ride with the highly anticipated Manitou Dorado Pro fork and super adjustable Revox shock. Clayton Goldsmith of Hayes Bicycle Group commented, “Everyone on the team is a class act and as a group, this is exactly the type of team HBG wants to partner up with. Their choice of riders and equipment is going to make them potent, and I would say probably one of the most successful first year teams. They are also one of the few teams we’ve chosen to run the new Dorado Pro DH fork this year – so of course their Banshee rigs will be the envy of everyone in the pits! Expect to see big things from Team Geronimo in 2010!”

When the rubber officially hits the dirt at Sea Otter, the team will be hooking up in the corners with Intense Tyres. "We are extremely excited to work with such a great group of Pros and the Jr. Development team, as the Intense Tyre System line has been fully redone for 2010 and this will really help get the tires out in front of the fans and atop the podium with this excellent program" – from Pete Dylewski, Marketing Manager at Intense Tyre.

MRP’s Ryan Cranston also commented, “MRP is extremely proud to partner with such a world class squad. Team Geronimo will be rocking G2 chain guides, Camber cranks, and Podium chain rings as they hang it all out there in pursuit of victory in 2010! Watch out for these guys!”

WTB has come on board with their sexy new Devo seat, which will sit on top of FSA’s Gravity seat post. FSA will also keep the cockpit in check with their line of Orbit headsets. Obtainium Performance Products’ titanium springs bring superior performance to the handling of these stunning bikes in addition to shaving weight and precious seconds off race times. Point 1 Racing stems and platform pedals, ODI grips, Shimano drive train components, Crank Brothers clips and Framewrap come together to finish off the build of Team Geronimo’s incredible rides.



When traveling by air, the team will use the incredibly well designed, sturdy and lightweight bike boxes by Crateworks. Ogio has also stepped up to aid in the team’s travel comfort with their progressive line of gear bags, hydration packs, helmet cases, and race umbrellas.

http://www.hayesbicycle.com
http://www.intensetires.com
http://www.mrpbike.com
http://www.wtb.com
http://www.fullspeedahead.com
http://www.obtainiumperformanceproducts.com
http://www.pointoneracing.com
http://www.odigrips.com
http://www.shimano.com
http://www.crankbrothers.com
http://www.crateworks.com
http://www.ogio.com


- The Coaches -

Gene Hamilton of Betterride is the official skills coach of Team Geronimo. His techniques are proven, his guidance invaluable, and it is time for the gravity biking world to catch up with other sports by retaining coaches – Team Geronimo is honored to be working with Betterride. Gene comments, “I am excited to be working with Team Geronimo. I’ve coached Graeme Pitts and the Buell Brothers in the past, and I look forward to working with Cody Eichhorn. They all have the potential to do really well, and have an impact on the sport. It is going to be a fun and successful race season with one of the best new teams on the circuit.”

James Wilson of MTB Strength Training Systems is the official strength coach of Team Geronimo. Wilson’s program has steadily become recognized as the premier mountain bike strength training system, especially for gravity racers. His workouts produce maximum results that correspond to decreased race times and injury avoidance due to flexibility. Wilson’s routines are sport specific, don’t require a huge investment in time and allow for quick recovery - almost too good to be true.

Taking time out from Tabata Intervals, James added, "I'm excited to work with a team that is obviously so dedicated to the sport I love. They've shown that they are serious about developing and supporting talent and I'm looking forward to helping them on their mission to make a splash on the racing scene."

http://www.betterride.net

http://www.bikejames.com


- About Team Geronimo -

Team Geronimo is home to a five-star line up of some of the strongest young talent in the Professional gravity racing world: Michael Buell, Brian Buell, Graeme Pitts, Brandon Turman and Cody Eichhorn (Australia). Team Geronimo is also proud of its Junior Development Team: Alec Toney, Madison Bailey, Teddy Benge, Tanner Spence, Robert Petit, Roy Benge and Tyler Spence – they are some fierce young rippers!

Behind the scenes, putting the puzzle pieces together for a successful 2010 race season are: Leslie Pitts, Team Manager; Brandon Turman, Marketing Manager and Junior Development Team Manager; and Troy Walch, Team Mechanic.

Look for Team Geronimo at the 2010 Sea Otter Classic, Pro Gravity Tour, Mountain States Cup Series, US Open, Crankworx Colorado, Crankworx Whistler, Fluidride Cup Series and select other events. The team is gearing up for entry into the World Cup Series in 2011.

The stokage meter about this team is cranked all the way up, and for good reason – they have incredible talent, vibrant personalities, and a true sense of professionalism on and off the race course. 2010 is going to be a phenomenal year.

Be sure to become a fan on Facebook and to follow Team Geronimo on Twitter!

http://www.facebook.com/teamgeronimo
http://www.twitter.com/teamgeronimo
http://www.geronimoracing.net

K9 Cup Installation by Scott Smith

One of the things that got me stoked on the Rune, was the ability to custom tune the geometry using angled headset reducer cups. This combo has gotten great reviews, and with the headset cups now coming in -1 and -2 degree options, seemed like the way to go. I opted for the -1 degree cups.e="font-family: times new roman;" class="MsoNormal">
One thing I considered was if the head tube needed to be faced or not. The K9 Industries cups are designed for a 4.625" head tube, and the Rune's head tube is 4.75. That's only .125" difference, or 1.58mm off both ends. K9 advised that facing was not required for this amount of difference. I also wanted to avoid facing since it could potentially cut into the welds a tiny amount. So I opted to skip the facing and proceed directly to....

Installation!
The K9 cups have notches at the front and back, which are meant to align with the front & back centers of your head tube. So the first step for installation is to determine exactly where the centerline of your head tube is. The method suggested by K9 is to lay masking tape down the center of your top tube, then sight along this to the front of your head tube, which also gets some tape to temporarily mark the center. Although not suggested by K9, I found a set of vernier calipers were very helpful in determining the center of the top tube. I was pleasantly surprised to see that the banshee team graphics are perfectly centered!

Installation of the tape down center of top tube and head tube:


Using calipers to make sure the tape is centered:


After checking with the calipers, it occurred to me that a laser pointer would be great for this- and I had one in the form of a cat toy. Playing with lasers in my garage also sounded like a lot of fun!

laser-checking the top tube


And the headtube


After verifying the center lines were correct, it was time to press the cups in! The cups are a tight fit, so K9 calls for anti-seize paste on the head tube. I tapped the cups in just a tiny bit with a block of wood and hammer, checked to make sure they were straight, then pressed both cups in at the same time, using a park headset cup press.

Upper cup


The cups pressed in easily after that, and everything tightened up nicely and spun freely. To be honest, this was a job I was a little apprehensive about- and it certainly requires more patience than a typical headset install- but it's not too complicated and I don't expect any durability issues.



Thanks for this Scott, I'm sure a bunch of our Rune, Wildcard and Scythe customers will find this a very useful and helpful tool if they choose to go for this option.


We make our frames strong here at Banshee, and we have no issue with these cups being used on any of our 1.5" headtube frames, except the Legend (Would you really want a 61.8degree head tube angle when unsaged anyway?). We don't want to limit our customers at all, and we realise that you guys are bike coneseurs anyway, who know what you want, and that sometimes it doesn't always perfectly match up to what we make, as everyone is different. So if you want to alter the head angle using this method, then go for it. However, be sure not to face the head tube to the point where it interferes with a weld, and to take your time and do the job properly just as Scott has done. As long as you do it properly then the frame will still be under warranty.

Thursday, January 28, 2010

Geax tires edit

Hey, A new video from Aaron Laroque that we shot back in the fall is finally out. The jumps in this video are in Kimberley B.C. I spent all fall working on them so the guys Luke Fulton and Brendan Howey could come out and have a fun weekend and it was worth all the work. I have been waiting a long time to post this video and I finally can. Hope you enjoy

Luang Nam Tha & Luang Pra Bang: Day Tripping

We were in Luang Nam Tha for a couple of nights. It was the first place that we have stayed that had a TV. For the most part we have been staying in the least expensive places that we can find. Most consist of two or three beds and a fan. In most places there has been a communal bathroom outside of our room. But in Luang Nam Tha we had a shower with hot water and cable TV. We stayed up watching HBO on our first night and did not get onto our bikes until later in the day. We took it pretty easy all day and just rode around town and to a near by temple.

   

I found a new way to ride my bike with the Xtracycle on it, but I do not think it will be too efficient in the mountains.

I spotted a little walking trail down one of the banks near the temple that looked like it would be easy to ride down. I think the pictures turned out pretty good. The dirt here kind of reminds me of the dirt at Bootleg Canyon.

 IMG_6832 IMG_6814

The second day we woke up ate some breakfast and rode out to a waterfall. The ride to the waterfall was more rewarding than the waterfall and we did not stay for long. The weather took a turn for the worst, I am pretty sure it was the first day of rain I have seen since I left Taiwan.

IMG_6860

Our most strenuous day was the three hundred kilometre bus ride from Luang Nam Tha to Luang Pra Bang that took around ten hours. The road was pretty bad and the bus stopped every couple of kilometres to pick up or drop off a local. When we arrived we found the cheapest guest house we could find a hit the local market for dinner. This morning was spent looking for a better guest house, which we could not find for a decent price. We spent the rest of the day riding to the Phousy Market and in search of a waterfall, which we never found.

   IMG_6872

The ride in search of the waterfall was worth it. We passed two local boys who found an interesting way to bath in a road side creek. We also passed a woman working in a field with her transportation parked at the side of the road. I wonder if my Xtracycle could be attached to her bike?

 

We took a bunch of pictures today. I picked out the ones that I think turned out the best. We are heading to a waterfall tomorrow (if we can find it) that is supposed to be pretty amazing. It will be a 35 kilometre ride to get there. I am looking forward to getting back out onto the road. The plan is to hang out here for another day or two and then start the four hundred kilometre ride to Vientiane, with several stops along the way I am sure. Enjoy the pictures.

IMG_6936

IMG_6900 IMG_6914 

IMG_6942 IMG_6948

Rob, James, Morgan

Monday, January 25, 2010

Bible what?!

A special double issue of Bike Magazine hit the news stands a few weeks ago. The Bible of Bike Tests. All i have to say is, "where do i sign up to join this crew next year?"




Banshee even made an appearance with the Paradox! I'm not sure what they are talking about when they say, "the stiff 5-pound aluminum frame might be a bit on the harsh side for an all-day slog..." I'm curious how long they actually rode this bike for. I was on mine for 28 hours in a 54 hour period and all i could think was, "THIS BIKE ROCKS! so solid, ready to charge downhill and get into the tightest of lines, thanks to the ultra tight chainstay. and when you jump on the pedals going uphill, you know where your power is going. straight into the wheels turning over pushing you uphill."

If you haven't ridden one, just do it. I have a medium in glenwood springs colorado pimped and waiting for you to go ride it.

Banshee RUNE and Fakawi Team riders featured in Cycling Asia Magazine!

Our Banshee RUNE on the cover of Jan/Feb 2010 issue of Cycling Asia Magazine!

Bonus- One full page write-up on the Banshee RUNE

Bike tester pinning it on the RUNE.


Top 2 pictures: Team riders Ausanee, Rizal and Gig made it into the news section.

..and a little article from the Fakawichief himself on how not to get yourselves killed...

Go get yourselves a copy of Cycling Asia today!
(available in Malaysia, Singapore, Indonesia and Thailand)


Sunday, January 24, 2010

Fogelsode #12: Making the Best of a Stormy Week

As the title suggests, we got hit by a big storm this week!  We spent most of the week over at Cob’s house, digging on the jumps.  The storm kept messing up the surfaces of everything, so we mostly piled dirt for a new line.  We put in a new underground drain and Cob worked his magic on the sixth hip landing.  I’m getting super stoked on that place, and can see some crazy seshes going down in the spring!  It’s a cool set up out there, with a dialed barn that you can chill in when the rain gets too gnarly.  After a few days of straight digging everyone started to come up with new things to do.  One was to drive around on the forest roads to check out the damage.  There were quite a few fallen trees, with some downed power-lines to go with them!  We found a muddy pull-off and Clay blasted through it in his truck!  Still raining, we found some old snow saucers and took them to the abandoned quarry to do some sledding (which ultimately ended up as a sore next day)!  Definitely some good times having fun in the rain though!

Towards the end of the week, the rain let up and Iggy and I set out to rip some muddy trails!  We rode some sick all-mountain trails, with rad high speed sections and fast jumps!  It was sick plowing through puddles and drifting wet corners!  It felt great getting out for a ride after not doing so for a few days as well!

 

Enjoy!

 

 

-Jack