Friday, September 11, 2009

Hello Scythe!


Banshee describes the Scythe as a bike that simply put, just works. That it definitely is, but unfortunately it is overlooked by a lot of riders as its stock geometry is more on the freeride side of things.

Using a 8.5 x 2.5 shock over the stock 8.75 x 2.75 shock, the geo settles to something in the right ball park for dh. Here is my experience of the first 3 months on the Scythe with this set up.
Deity pedals, one of those great bike parts that fly under the radar.

A little bit on my set up:
Parts are all transferred from my rune previously, I did have to build up a new wheel set as the rear is a 150mm for the scythe. Wheels are ZTR Fows laced to Hope Pro 2s, i cannot believe how light these wheels are, definitely gives the bike a very different feel. Easy to move around and accelerates well. Nothing special about the rest of the set up really. The build comes to around 37lbs with tubes, and just under 37lbs tubeless.

With the shorter stroke shock, the two travel options reduce to 7.3 and 6.4 inches from 8 and 7 inches. The only geometry that i measure was the head angle, it's 65.5 degrees now the rear travel at the 7in setting and the fork at 7.5 inches.

I could go a bit slacker by taking the fork up to 8 inches but the geo it working fine the way it is now. The bike was easy to get used to, single pivot in the back, nothing fancy going on in the links, nice geometry all made it a very simple machine. Nothing that will catch you out and surprise you, i felt right at home on it.
I am really impressed with the 2009 dhx, its quite an improvement over dhxs of past. Due to my light body weight, it normally means i am not able to run much compression damping using the pro pedal and boost valve before it felt really harsh on the higher speed hits. Not the case with the 09 dhx, it's almost a pity that they are replacing it with rc4 already.

This combined with the light wheels and simple frame make for a very good ride, it really feels glued to the ground and has loads of grip. A good mate of my agreed too, said it rides better than his full on dh bike.
yes, i still hate pedalling. so why carry extra gears?

cut down spikes, best served wet or dry

There isn't really any particular thing to shout about with this bike, that's not to say it's dull or rubbish. There are no fancy linkages in the suspension, clean lines that are functional as opposed to being pretty.

It's the whole package that makes this bike a great bike, one thing comes to mind when i think about this bike. What santa cruz used to say for their super 8: it's like a sharp axe in a world of broken chain saws.

At the end of the day it passes the biggest test, it puts a huge smile on my face!



Adam.
Fakawi |Banshee

Mythic Spitfire - sneak peak at Esher Shore

Mythic / Banshee Design Engineer Keith Scott came to visit me today at the Freeborn Esher bike shop located next door to the Esher Shore Freeride Bike Park

the purpose for his visit was not purely social, he came to show off his "Spitfire" trail bike protype - which looked very sick!!



above: Keith pretending to be a bike mechanic in the Freeborn Esher workshops...




above: Keith with his Spitfire in the Esher Shore bike park




above: the Spitfire prototype in all its glory...hmmm ;)




above: my stepbrother Sam Rogers and the latest addition to his family, Roxy, check out the Spitfire - by the time Roxy is old enough for biking, Keith will be designing anti-gravity bikes, a la "back to the future"!


Keith and I spent some time checking out the brand new Esher "pump track", which was running very sweet (its slightly different to most pump tracks in that it has 6 foot elevation changes and 50 foot long berms!) on my Mythic Rampant - unfortunately no photos as we are keeping the new track under wraps until its opened in Easter 2010

we setup the Spitfire with pro-pedal and lowered the fork and as far as trail bikes go, it actually handled the pump track pretty darn well!

I also had a good blast around on the Spitfire and despite being a size too large for me (at 5'10" I would ride the medium) my first impressions were that it felt tight, light and pedalled very quickly

Spitfire is looking very good already, and Keith has some changes to make before production, it can only get even better

cheers!

Rob C

Thursday, September 10, 2009

Amped on the Amp!

 

So I got my Amp frame all built up about a week ago and thought I’d share my first impressions.  As I got on it, the first thing I noticed was how low the front end is.  My old frame didn’t use an integrated headset so I am pumped on having one.  Upon riding it around in the bike shop parking lot, I realized how low the bottom bracket is, so I knew it’s going to corner like it’s on rails!  By the time the bike was built, it was somewhat late in the day.  I took it to the Post Office jumps though, and was very impressed.  The frame’s overall lower center of gravity, along with it’s slightly longer top tube allowed for a much more stable ride than my old frame.  I made it through the set first run, and then started tricking.  I was able to pull all of the tricks I normally do with ease, and we got a few quick shots on the new line as it started to get dark.  I would have filmed more, I was just having too much fun riding!

The past few days have been spent riding and shooting different spots with photographer Justin Brantley.  As you can see here, he slays it with a camera!

 

 

That’s about it for now.  The Rampant is all built up as well.  I still gotta work out some kinks with the rear brake but I’ve gotten to ride it a little and already know it’s going to be one of the funnest bikes I’ve ever owned!  It feels sooooo fast on trails and jumps effortlessly!  More on that later though.  For now, here’s a pic of it!

Well, I’m off to Folsom tomorrow morning for the Fam Jam!  Super stoked, it’s gonna be sickkkk!

Thanks to Banshee, Gamut USA, and Scotts Valley CycleSport for getting me all set up on the new rides!

 

-Jack Fogelquist

 

Photo Credit: Justin Brantley

Tuesday, September 8, 2009

West Fernie Dirt Jumps

A couple of weeks ago James and I went to the West Fernie Dirt Jumps. I forgot my knee brace at home so I was on camera duty. James got to ride with a bunch of the local 12 year olds.

IMG_5073

(If you can not spot James, he is the bigger guy on the left.)

Table Top

jim5419 jim_5032  jim5094 

Tuck No-Hander

 jim5181   jimt5248

Toboggan

jim_5382  jim_5394

We had a great summer or riding and hope that the snow does not come too soon. There are a couple more trails that I want to ride before I head back to Taiwan.

Keep riding.

Rob and Jim

Monday, September 7, 2009

Paradox Review No.2

Hello everyone,

While back in Nelson last week I got two good rides in on the Paradox, one on Paper Bag, and one on Seven Summits.



Paper Bag, is a technical descent oriented trail that starts out with a lot of up-and-down before dropping the vert in short order. Me and my buddy Waz used to ride it on Saturdays in high school to shake off the hangover. It’s been a while since I’ve ridden it clear minded. The Paradox was great for the initial part of the trail with lots of speed and direction changes. Now-a-days, people just ride the downhill portions and push on the uphill portions. The Paradox brought me back to 2000, when free riding included climbing. She made it up most of the tech portions with little effort from me. I bitched out on a few things, but mostly because I was feeling tired and just didn’t have the drive that day. Plus it was super hot. I like how stable the bike feels on uphill switchback corners. It does feel bigger than a 26’er but still somehow still fits. It feels more stable and like there’s more room for error – forgiving I guess.



Jay mentioned that DHing on the Paradox was a little like brining a knife to a gun fight. While I don’t disagree, it is important to note that a knife can be just as deadly as a gun, when used properly. The DH portion of Paper Bag was more challenging on the Paradox than on my FR bike (obviously!). However, everything was still rideable, but at a lower speed and with a little more deliberateness with regards to choosing a line. You can’t just point and shoot in the steep and loose, but you can choose a careful line and pilot the bike down. Of course, the Paradox is not intended to be a gravity bike, but my point is, it’s still capable, though it doesn’t excel at DH oriented riding. I found myself lofting the front wheel just a little to smooth out the transitions of the many steep rock drops/chutes. A square edged rock managed to put a nice flat spot on my rear rim. I was waiting for the hiss of leaking air for the rest of the ride. Somehow the flat didn’t occur till we were already down – but it was right at the flat spot on the rim. Strange. Always remember to carry a spare 29r tube in your pack if you usually ride 26 bikes – or at least a patch kit.



Side note: If anyone wants to check out Nelson trails, pick up the detailed guide book Roots Rocks Rhythm from one of the many stores on Baker Street. $15 bucks is worth it for proper directions – chicken scratch drawings on beer coasters are only so good! Plus the revenue from these guide books goes to trail maintenance.

Seven Summits is definitely an epic XC/AM trail that everyone should try. It has become reasonably popular (especially for a Kootenay trail) and we’ve hard of people driving 8 hours from Vancouver specifically for it. As a result, it’s seen some wear, but there’s an active trail crew that maintains it – we passed them as they were fixing up a section. Thanks Spooner! I rode it with my sister and my friends Trevor and Kelly. It’s got some pretty rough sections – lots of fist sized rocky zones, but also lots of buff singletrack. I think the ideal bike for this trail would be a 5” and 5” full suspension (Spitfire… ahem… ahem). . At the end of the Seven Summits, you can drop the Dewdney to add to the descent, which we did. The Paradox blew my mind on the climbing portions of the trail. I kept up with Kelly and she’s some crazy wicked tri-athlete who trains religiously and I’m just a hack who skis and bikes. As I noticed on Paper Bag, this bike feels really stable on switchback climbs. As far as the flats and downhills go, the bike still rips, but you have to choose the right line, as you would with any hardtail. If you get sloppy and just ride over the rocks, you are gonna feel it – it is a hardtail. However, the curved seat stays do add some vertical compliance. I rode this trail on my Scirocco (with straight seat stays) years ago, and remember feeling substantially more vertical harshness.


Overall, I think a little bit of the vulnerability I felt on the descents was due to the Scwalbie 2.1 Little Albert tires. The have a very rounded profile. So, although you get a longer contact patch with the 29er wheel, it is also narrower with these tires. I don’t know what that does to the entire contact area – might be equal to or even less than a 26er with fatties at low pressure. I want to try some different tires soon. I have a feeling it will completely change the feel of the bike. The little Alberts are great for ripping the shit out of tacky and loamy singletrack, but when the going gets tough (steep and loose), they left me feeling a little exposed. Jay, what do you think of your set up? Didn’t you pick some 2.3’s or even 2.4’s? I can’t remember.



Addendum

This afternoon, I spent some time monkeying with my cockpit set up on the Paradox. I rocked the handlebar forward a little bit, so the curve of the bar would be more upward, and less backward. I also moved my brake and shift levers further away from the grips. I fussed over the Reba a little bit and increased the compression damping a few clicks. What a difference! I felt a lot more confident in my braking and overall body positioning on the bike. The greatest benefit was the fork adjustment though. I’m not overly familiar with RockShox, so it takes me a while to get them dialed the way I like them. With two clicks (from fully open) the bike felt more stable when adjusting my weight and braking – less pogo stick action. It bunny-hopped way better and felt better launching lips. And, I didn’t notice any loss in bump absorption. Does anyone have any advice on how to set these forks up? I’m all ears. I sure wish I’d had my bike set up this way for Paper Bag and Seven Summits – I would have ridden better for sure.



Oh, I stopped by Hardcore Bikes today and threw the Paradox on their scale. She weighted in at 28.66 lbs (13.00 kg) with the build I described before plus a little bit of dirt and with my steerer tube still an inch above the top of the stem. Oh, I also changed the front derailleur to an X9 with the high clamp – and there is more tire clearance now.



Anyway, this afternoon, me and my buddy Dustin went and sessioned some Mill Creek Trails (back in Edmonton now – Nelson vacation is over) and took some pics. We put on our best Kranked I – Live to Ride hats and threw down on some drops. Enjoy the pics.





Side-Note

While I was back, I also met up with my buddy Travis Hauck (the NRG rep) and did a heli-drop to Burn and Beyond up Kokanee (on my FR bike not Paradox…. sorry guys….). This trail starts at the top of Mount Solid, which is just west of the peak you see on the Kokanee Beer can. The next day we got Pat Williams from Kootenay Dirt Tours to shuttle us up at Baldface Lodge all day. We rode Cherry Toppers, Short and Funky, two new unnamed trails and Shannon Pass. In total (according to buddy’s GPS), we got 3600 vertical meters (yeah, meters, not feet) of descending that day. It was mad. I think there was a post on pinkbike about this area a while ago – hurting for vert or something. Then the next day, we hit up Power Slave – a wicked trail up Give Out Creek (see Roots Rocks Rhythm). This is easily one of the best trails in Nelson. Placenta Descenta followed, and then Skier’s Right.



Should be a fun fall, with tackier trails,


Kurt Morrison

Oh, by the way I remember reading a post on the blog a while back all about the Scirocco. In the comments, a few guys were jonsing and couldn’t find any to buy. Good news my friends. I was at Sacred Ride in Nelson and noticed a Scirocco (not sure what size) hanging from the rafters for CAD $350, so there you go!

Saturday, September 5, 2009

Mythic Spitfire in MBR magazine


Along with the Mythic Rune bike test in the latest MBR magazine here in the UK, was this great snippet in the 'Hot Gossip' section

The bike shown is Keith's prototype Spitfire 5" trail bike, that is due for release in 2010

MBR are going to be involved with testing a second prototype, and giving experienced feedback to Keith to help him fine tune the design

Considering the stonking test the Rune had in MBR, and the fact that trail bikes outsell all other suspension bike cateogories in the UK about 10:1 - the Spitfire could be just what Mythic needs to truly explode big into the UK market

personally I cannot wait to get my hands on a spitfire ;)

cheers

rob c

Thursday, September 3, 2009

Matej - last 3 weeks - HATTRICK!!!

Hey Keith, Jay and all others.

After a 2 weeks break from racing there were last 3 weekeds filled to the
top.

The first there was a 3rd race of National series which took place in Bozi
Dar, the highest situated village in Czech Republic and ended with a sprint down the road into town . It was pretty
challenging race for me, because I was leading the cup by a couple of
points. I had to do my best in semifinal and also in final. Both raceruns I
was carrying the speed well and was also in my pretrained line. I finished
1st in both runs and made bigger gap in overall between me and second.



The second weekend (22.-23.8.2009) I thought I'll be off. Unfotunatelly I
found a Hungarian National Champs in Tokod on UCI Calendar. I managed to try
it. First part of the course was really steep and loose - real fun to ride.
The second part was speeding on the meadow with open fast corners and one
big jump. At all the course was good. I tried to push it, I did a couple of
small mistakes but I crossed the line with the fastest time, tho! I was
really surprised, how the people from hungary was carrying about me. They
made me a VIP pit, they were coming to me and telling important
things...nice experience.


The last weekend I traveled across the east border to Slovakia (Velka Raca -
Oscadnica) where a lot of guys from my country are going to race when there
are no races in Czech. It was 4th race of Slovakian National Series. On
Saturday there was non-stopping rain, heavy rain! I decided just to walk the
course and watch the lines. On Sunday, the race day, I did 3 runs before the
racerun. I know it's not too much but I felt really good, tho. I did really
smooth run with hard pedaling and I won the race with 6seconds gap!!


Pin it!



Cheeers

Matej Charvat

www.CharvatBros.com

Wednesday, September 2, 2009

Getting high... In the mighty San Juans

Linden and I put our brand new Paradox frames to a major test this past weekend. Two days of absolutely insane riding and hiking. And hiking? Ever try to ride your bike up a 20 degree slope at 13kft? It is a freaking hard time! Here is a small taste of what we put ourselves through.


Just a little bit of exposure. Linden making his way across a ridge off of Red Mountain #3 (12890ft). Just of few feet down to the valley floor, more like 1500 ft of sheer drop on either side.


Linden making his way up the start of Imogene Pass. The pass goes from the town of Ouray Colorado at 7700ft to 13000ft with in 14 miles.

Tuesday, September 1, 2009

Banshee Legend MkII

As most of you know, a total of 62 Legend MkI frames have been used, abused, raced and podiumed over the last 18 months, all in the name of progress. I have had huge amounts of feedback and suggestions from a lot of great riders, bike mechanics and engineers, and I have tried my best to take it all on board and use it to develop, refine and improve the Legend for the MkII version which will be available to the public for 2010.


In general the feedback was very positive. Everyone seemed to comment on just how fast this bike was and the majority loved the way it rode, but there was definitely room for improvement.

I'll admit that we did run into a few issues. The biggest issue was pivot wear... not the bushings wearing out, but the axles! I've tried a couple of different materials, but due to the high loads and large diameters combined with wide angles of oscillation wear has proven to be an issue on the legend. The other issue with bushings on the legend frame has been stiction if tolerances are not spot on, or pivots are over tightened. So after much debate, I have switched the design to run on high quality (INA) large diameter fully sealed cartridge bearings, combined with a new pivot assembly to reduce friction in pivots to an absolute minimum, whist still being able to handle the loads without needing to be replaced regularly.


To put this in perspective, the bearings I am using in the main pivot where loads are highest are 6202-2RS bearings which have a 35mm OD. Bigger bearings cope with bigger loads. All the bearings I have used are also common bearings, and so affordable and easy to source. If you did need to do a full bearing replacement for every pivot, then I calculated total cost to be around $40 if bought from a regular bearing supplier. I was checking out a competitors bike, and the main pivot which takes similar load to the legend main pivot, uses a bearing that only takes 1/4 the load, and costs almost 4 times as much!

I considered needle bearings and double row angular contact bearings, but after some number crunching and load analysis, the deep groove ball bearing came out on top. It can cope well with lateral loading (which happens a lot in DH racing) as well as the axial loads that the suspension demands. I have kept the pivot assemblies as simple as possible, as well as fully floating, there is zero friction caused by friction on washers or anything like that. All pivot axles will be manufactured from high grade steel (12.9Cp) and we will be looking at doing a racer upgrade kit in titanium in the future to save some grams, and add a little bling.

The bearings themselves add a little weight over bushings, but I have cancelled this out by weight savings elsewhere, while also making the bike stronger in the process.

It is not just the bearings that have changed however, there have been literally hundreds of tweaks and alterations based on the feedback I received. Not a single CNC part remains the same as the last batch, everything has been looked at again and refined or totally redesigned. It might take a keen eye to spot them, but there are changes almost everywhere to strengthen, lighten and generally improve the design and make it more compatible with parts like chain guides, as well as improve manufacturing tolerances by changing assembly patterns.



Other main changes:

  • There will only be one travel setting of 8" (203mm)
I found that nearly everyone rode their MkI legends in the one setting the whole time without switching except to give the other option a quick try. I feel that 8" is the right amount of travel for the majority of DH courses.

  • Suspension linkage
I have modified the linkage geometry and components to make the leverage curve a little bit more linear (was slightly too progressive before). This will make tuning shocks easier, and offer the rider slightly more control and traction.



The axle path is not as initially rearward as before, which reduces the chainstretch and pedal kickback experienced. Don't worry, it is still more rearward than most DH bikes to give great square edge bump absorbtion, but will feel more controlled now, as the radius of curvature of the axle path is not as tight.

  • Geometry


Well, I'll let the following geo table do the talking here, but essentially the BB has dropped, the head angle has slackened, and the top tubes are longer. The longer top tubes have pushed the weight up slightly, but only by maybe 100g or so. We'll post actual weights when we have a couple of protos ready.


I think I have covered everything now, and anything I haven't you will probably be able to spot in the following pics from my computer screen.


Oh, I'm blatantly going to be asked about cost and availability dates... Cost has yet to be confirmed as it depends on a few factors as well as the shock that we ship the frame with. Availability will be early 2010.

I want to just say a big thanks to all those legend test riders out there who have supplied me with feedback. I have done my best to adjust everything accordingly to follow the general trend. I couldn't have done it without you!

If you want to know more about anything, or have any other questions, then just post it in comments below and I'll answer as soon as I can.